About Us

 Revolutionary Vehicle Clear Coat Protection

ArmorCoat Paint Protection Coating is a spray installed vehicle clear coat  bra system designed to protect painted surface’s. Ensuring protection in high wear areas of vehicles most prone to chipping and damage.

The factory paint finish on most new cars or trucks is a durable finish. Comprised of multiple layers: primer, colored base coats, and a hard baked on clear glossy topcoat. Much trial and testing have gone into ensuring your vehicle maintains its original color and appearance. But often, applied at a thin layer of only 4 to 5 mils thickness (4 to 5/1000 of an inch), these finishes are subject to chipping after short term use. These factory installed surfaces become susceptible to severe impact caused by large stones or loose gravel. Plus upon high speed impact, those surfaces covered by a hard thin clear coat have a tendency to shatter. The damage often leaves a crater exposing the primer or bare surface of the hood, bumper or body panel.

ArmorCoat Spray Installation

 ArmorCoat is spray installed at a dry film thickness 3 to 4 times greater than traditional automotive clear coats. Areas not to be covered are masked off prior to installation. ArmorCoat is applied and allowed to air dry.

What’s so revolutionary about ArmorCoat?

Never before has a product like ArmorCoat been available as an aftermarket option for passenger, fleet and custom painted vehicles. ArmorCoat is designed as a permanent solution to the age old problem of automotive paint chipping. When sprayed and cured over an existing OEM or body shop clear finish, the highly flexible and impenetrable properties of ArmorCoat will reduce and prevent chipping, scratching and damage caused by stones, insects and weathering. Best of all, it’s virtually invisible.

Adding Value and Investment

Putting aside the emotional trauma of chips in your new car’s finish, it improves the resale and trade in value which diminishes with each scratch, chip, dent and ding. Now ArmorCoat with its ability to absorb impact and ward off chipping can preserve the beauty and integrity of your vehicles original OEM or custom finish.  It ensures a lasting value to one of your single largest investments.

ArmorCoat is designed for cars, trucks, motor homes, over-the-road trucks, motorcycles and any painted automotive surface subject to damage caused by normal use and daily driving.